Cutting Acrylics - Jones Laser Craft

Cutting Acrylics

Laser cutting acrylic is a great way to create precision cuts and intricate designs in acrylic sheets. It is a fast and efficient process that can be used to create a variety of products, including signs, awards, and jewelry.

To laser cut acrylic, you will need a laser cutter and a design that you want to cut. The design can be created in a vector graphics program, such as Adobe Illustrator or CorelDRAW. Once you have created your design, you will need to send it to the laser cutter. The laser cutter will then use a high-powered laser to cut the design out of the acrylic sheet.

When laser cutting acrylic, there are a few things you need to keep in mind. First, you need to choose the right type of acrylic for your project. There are two main types of acrylic: cast acrylic and extruded acrylic. Cast acrylic is more expensive, but it is also more durable and has a better finish. Extruded acrylic is less expensive, but it is also more prone to scratches and chips.

Second, you need to choose the right laser power for your project. The laser power will determine the depth of the cut. If you are cutting a thin piece of acrylic, you will need to use a lower laser power. If you are cutting a thick piece of acrylic, you will need to use a higher laser power.

Third, you need to choose the right speed for your project. The speed will determine the quality of the cut. If you cut too slowly, the acrylic may melt or warp. If you cut too quickly, the acrylic may not cut cleanly.

Fourth, you need to choose the right focus for your project. The focus will determine the accuracy of the cut. If the focus is too high, the laser will cut through the acrylic too quickly and the cut may be inaccurate. If the focus is too low, the laser will take too long to cut through the acrylic and the cut may be rough.

Fifth, you need to choose the right material settings for your project. The material settings will determine how the laser interacts with the acrylic. The material settings will vary depending on the type of acrylic you are using and the thickness of the acrylic.

 

Be Safe!

Jessie Jones Headshot
Back to blog

Leave a comment

Please note, comments need to be approved before they are published.